Custom-manufactured intake housings and ducting built specifically for your vehicle. Heat-resistant, lightweight, and designed to fit where factory parts won't.
We print intake components in ABS, ASA, nylon or carbon fibre-filled filaments — materials that hold their shape and seal under sustained under-hood temperatures.
Every housing is designed or adapted around your actual engine bay geometry — mounting points, MAF sensor ports, BOV bungs, and filter necks included.
Smooth internal bore geometry, optimised routing to minimise turbulence, and reduced weight compared to factory plastic assemblies.
Tuning your setup? We can revise the design and reprint quickly — no tooling costs, no MOQs. Iterate until it's exactly right.
| Primary materials | ABS, ASA, Carbon Fibre-Filled Nylon, PETG |
| Continuous heat resistance | Up to 100 °C+ depending on material selected |
| Build volume | Up to 256 × 256 × 256 mm per section (joinable for larger runs) |
| Common integrations | MAF sensor ports, BOV / blow-off bungs, filter flanges, silicone coupler seats |
| Typical turnaround | 1–3 business days after order confirmation |
| Finish options | Raw print, sanded, primer-ready, or painted to specification |
Don't see your car listed anywhere? That's expected — every build is custom. Send us your engine bay photos or dimensions and we'll take it from there.
Send your .STL or .STEP — we'll review it, recommend a material, and give you a quote. If it needs minor adjustments for printability we'll let you know before we start.
Photos of the engine bay, the existing intake or piping, and key dimensions (inlet diameter, outlet diameter, length, any port sizes) are enough for us to build from scratch.
Send us your dimensions or a photo — we'll have a quote back to you the same day.